This is an adapterboard to add a FPC flat cable connector to a BennVenn IPS kit.

 

This flat cable matches with the FPC cable on the GameGear Mainboard 315-5535 v1.5 and later revisions.

 

Installation is simple, place the adapter board on top of the BennVenn IPS kit PCB and solder the pads. Take  your time to do this to ensure all solder flowed on the pads below it. Once installed it might be the PCB is loose from the LCD panel, for this some double sided adhesive tape is included.

 

Use the little screws to assemble the kit on the mainboard, once fitted insert the flat cable with the blue tab facing up. Fasten the flat cable by pushing the level on the back down. Make a 90 degree angle in the cable and insert the other side into the mainboard connector.

 

No more messy wire installation, this is so far the cleanest way to install a LCD kit!

 

Note: BennVenn IPS LCD kit is not included, you can buy them here

BennVenn to FPC adapter

€ 5,00Price