Did you ever want a matching volume wheel for your creme white Game Gear? Now it is available!
 
This volume wheel is an old stock from ALPS, there is a small side note to this; the wheel is in reverse direction! The PCB board has been adjusted to match with this wheel and it is not possible to just swap the wheel with any other soundboard!
 
This is a brand new manufactured sound board compatible with your Sega Game Gear, using all new components. The board is a drop-in replacement; disconnect the 2 connectors, remove the 2 screws and install the new board. No adjustments needed to your Game Gear!
 
I am an retro gaming enthousiast and one of my passions is to create new replacement parts for Sega and Nintendo consoles. All my products are assembled with the best parts available, next to this I am doing all assembly and testing myself - to ensure you get the best product!
 
The board is build with the same schematic as the original sound board, however during testing I measured less noise when I mounted a larger bypass capacitor. This also removes most of the noise when you install a new aftermarket LCD kit. To proof this I have added the test results with MDFourier, where I compared a VA0 sound board with my own version.
 
All parts are picked based on quality:
  • Original ST Microelectronics TDA2822D amplifier chip with a total harmonic distortion of 0.2%
  • Panasonic F-series electrolytic capacitors with a minimum lifespan of 2000 hours @ 105C
  • Murata ceramic capacitors
  • ALPS volume potentiometer, no more open gap!
 
Limited variant! I will only produce 50 of these!
 
 
Please verify if you  have a Tyco AMP CT connector (most common) or JST PH connector (P3-serial numbers and USA 2110K or 2110G models).

Game Gear replacement sound board v1.2R - White volume wheel

€ 14,00Price